AMI Plus BIOS

From SoftHistory
Revision as of 08:11, 30 April 2024 by Rueni97 (talk | contribs)
POST screen for AMI Plus BIOS

AMI Plus BIOS, also unofficially nicknamed "AMI Pre-Color BIOS" since it predates AMI Hi-Flex BIOS (first version with a colourful setup utility), is a version of AMIBIOS released by American Megatrends in 1987. It is the earliest version of AMIBIOS that includes a built-in setup utility for configuring the CMOS settings without booting into a separate floppy disk containing the utility.

It was also the first and only version of AMIBIOS to include a built-in system diagnostics program, a limited version of AMIDIAG specifically, although not always. Instances with built-in AMIDIAG often use "D" or "DE" for the CMOS setup type section in the BIOS string (see the BIOS string section).

Setup utility

Early releases of AMI Plus BIOS included a limited, quirky setup utility which displays all settings one-by-one (with the setup exit prompt being displayed last) and requires a value to be entered for each of them, instead of displaying all of them at once and giving the user the ability to navigate between them (so just the specific required changes can be made quickly). Because of this, to change a specific setting, the user has to review or change all settings, which makes using it less convenient and slower. At some later point, this quirky setup utility was replaced with a new one that displays all settings at once and allows the user to navigate between them so just the required changes can be made without reviewing all settings.

Some motherboard manufacturers (like PC Chips and TriGem) used their own setup utility program with Plus BIOS. These are different from the default utilities included by AMI.

AMIDIAG

Limited version of AMIDIAG included with some AMI Plus BIOSes

Main page: AMIDIAG

AMIDIAG is a system diagnostics utility developed by American Megatrends for DOS based operating systems. The version included with some instances of Plus BIOS is a limited version compared to the actual full version of it.

The following diagnostics are included with the limited version included with Plus BIOS:

Hard Disk

Note: Hard disk diagnostics are only accessible when a hard disk is detected in AMIDIAG.

  • Hard disk format
  • Automatic interleave
  • Locate and mark bad sectors ("Media analysis")
  • Performance test
  • Seek test
  • Read/verify test
  • Cylinder read/write test ("Check test cyl.")
  • List bad tracks ("Force bad tracks")

Floppy

  • Floppy format
  • Drive speed test
  • Random read and write test
  • Disk change line test

Keyboard

  • Scan/ASCII code test

Video

  • Sync test
  • Adapter test
  • Attribute test
  • 80x25 display test
  • 40x25 display test
  • 320x200 graphics test
  • 640x200 graphics test
  • Page selection test
  • Colour test

Miscellaneous

  • Printer adapter test
  • Communication adapter test

Technical limitations

Maximum storage size limit

While the default setup utilities included with Plus BIOS support inputting the necessary configuration values for storage devices up to 32 GB in size, in most cases only up to 504 MB of this size can actually be used. This is due to lack of LBA (Logical Block Addressing) support in all versions of Plus BIOS (excluding some instances of the TriGem code fork).

Various workarounds also exist for this limitation, such as using BIOS storage overlay utilities like Ontrack Disk Manager to use larger storage devices up to 32 GB.

Identification string

AMI Plus BIOS also introduced a new 16/17-character identification string, different from the older format used with AMIBIOS 2.2x. The first (or on 17 character strings, first two) character of the string indicates the CMOS setup type. D indicates built-in AMIDIAG diagnostics, E indicates no AMIDIAG but extended CMOS setup, S indicates no AMIDIAG or extended setup (standard setup only). "DE" was also occassionally used (for 17 character strings), indicating both built-in AMIDIAG and extended CMOS setup are available.

The new string is formatted as the following:

D: CMOS setup type, CCC: Chipset type, MMMM: Manufacturer/OEM identification code, SSSSSS: BIOS subcore release date, KK: Keyboard controller (KBC) ID (with second character indicating the model).

DCCC-MMMM-SSSSSS-KK

Note: As stated above, occasionally 17 character strings (instead of 16) were also used, where one extra character is used to indicate the CMOS setup type "DE" (for built-in AMIDIAG diagnostics and extended CMOS setup)

Example string: D286-1277-043089-K0

This string is for a 04/30/89 (April 30, 1989; date is in American format) dated revision AMI Plus BIOS with regular CMOS setup and built-in diagnostics ("D") for a machine with a discrete i286 logic ("286") and a default/unknown keyboard controller (K"0") for Trangg Bow Co. ("1277").

The manufacturer, chipset and keyboard controller codes can be found here.